Troubleshooting Page 159
The image is inverted as if viewed in a mirror
The image size or position is incorrect
The interface cable
is not securely
connected.
Turn off your printer and computer. Then make sure the cable is
connected securely and meets the printer’s specifications.
Your video driver may
be conflicting with the
EPSON printer driver.
Change to a standard VGA driver (see your computer or video card
documentation for instructions). If your printout is correct, your video
driver is interfering with the printer driver. Contact your computer or
video card manufacturer for an updated driver.
Possible cause Solution
You used a Flip
Horizontal option.
Turn off the Flip Horizontal or mirror setting in your application software
or the printer software. See Customizing Print Quality and Special
Effects for instructions.
Possible cause Solution
The paper and/or
layout options are set
incorrectly.
Check the paper settings and the settings on the Layout dialog box
(Windows 95, 98, and NT, or Macintosh only). See Selecting Print
Layout Options for instructions. Also check the paper and layout options
in your application software.
Possible cause Solution
To Next Page
Loading...
