Advanced Printing Page 46
Using a Color Correction System
To achieve the maximum color accuracy, you can use Image Color
Matching (ICM; Windows 95 and 98 only), Standard Red Green
Blue (sRGB; Windows 95, 98, and NT only), or ColorSync
(Macintosh only), if your system is set up to use them.
1 Create your image or document in your application software.
2 Access the printer settings dialog box as described in Printing
from Windows or Printing from a Macintosh.
3 Click Custom, then select either ICM (Windows 95 or 98 only),
sRGB (Windows 95, 98, and NT only), or ColorSync
(Macintosh only) as described in Using Custom Project Types.
4 Click the Advanced button. The Color Management section of
the Advanced dialog box appears as shown here:
Note:
The Color
Management section
also changes to this
view if you select the
ICM
,
sRGB
, or
ColorSync
radio
button on the
Advanced dialog box.
Windows 95, 98, NT
Macintosh
Not available
with
Windows NT
For details, see
Using ColorSync
on the Macintosh
To Next Page
Loading...
