Epson BrightLink 450Wi - Enabling WPA Security

Using the Projector on a Network 99
10. When you’re done making these settings, press Esc. Choose
Complete
and press Enter, then choose Yes and press Enter to
save your settings.
Enabling WPA Security
1. Press Menu. Highlight Network and then press Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter. You see the following
screen:
4. Press
Enter to show the menu, then choose one of the following
and press
Enter.
■ WPA-PSK (TKIP)
■ WPA-PSK (AES)
■ WPA2-PSK (TKIP)
■ WPA2-PSK (AES)
5. Press
Esc to return to the previous screen.
6. Highlight the
PSK (pre-shared key) and press Enter. Use the
arrow buttons to select individual letters; then press
Enter to
input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and