Related tasks
Replacing the Pen Batteries
Calibrating Automatically
Calibration coordinates the positioning of the pen with the location of your cursor. You only need to
calibrate the first time you use your projector, and you do not need the pens or a computer for
calibration. You should not need to calibrate again unless the projector or image is moved, or the image
is resized.
Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing
the Menu button on the remote control as described below.
1. Press the Menu button, select the Extended menu, and press Enter.
112
To Next Page
Loading...
