Epson BrightLink 595Wi - Setting Up the Projector; Projector Placement

31
English
B Assemble the parts
1. Assemble the wall plate.
Assemble the three plates into one unit, and secure them with the M4 × 12 mm hexagon socket head
cap bolts (×6) supplied.
2. Attach the slide plate to the projector.
Attach the slide plate to the projector using the M4 × 12 mm hexagon socket head cap bolts (×4)
supplied.
M4 × 12 mm hexagon socket head cap bolts
Spring washer
Washer
M4 × 12 mm hexagon socket head cap
bolts
Spring washer
Washer
Slide plate