Epson BrightLink 595Wi - Adjust the Horizontal Slide

45
English
2. Turn the dark blue knob ( ) to adjust the horizontal rotation ( ).
3. After you finish making all of the adjustments in steps
E to J, tighten the screws (x2) you
loosened in .
G Use the adjustment knob on the top to adjust the vertical tilt
1. Loosen the screw ( ) to unlock the adjustment knob.
2. Turn the light blue knob ( ) to adjust the vertical tilt ( ).
3. After you finish making all of the adjustments in steps
E to J, tighten the screw you loosened in
.
H Adjust the horizontal slide
1. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2), and then adjust the slider for the slide
plate.
Screw
M4 × 12 mm hexagon socket
head cap bolts (×2)