19
© 2016 IVS Computer Technology®, Inc. All rights reserved
How Does the BrightLink™ Interactive
Projector Work?
Interactive Pen Calibration
Before you begin using the BrightLink™ interactive projector, you will need to
perform a calibration to coordinate the position of the interactive pen with the
location of the cursor. You only need to perform the calibration the first time you
use the interactive features of the projector. The calibration results will remain
until you calibrate again. Make sure that you calibrate the interactive pen before
you perform the finger touch calibration. Perform the calibrations again if you
notice positioning discrepancies after performing a Keystone correction, adjusting
the image size, using the Image Shift feature, or moving the projector.
Manual Calibration – Interactive Pen
1. Press the Menu button, select the Extended menu, and press Enter.
2. Select the Easy Interactive Function setting and press Enter.
3. Select Manual Calibration and press Enter.
To Next Page
Loading...
