14
© 2016 IVS Computer Technology®, Inc. All rights reserved
How Does the BrightLink™ Interactive
Projector Work?
Interactive Modes: PC Free and PC Interactive
The BrightLink™ interactive projector turns any flat surface into an interactive
whiteboard, either with or without a computer. There are two Interactive Modes:
PC Interactive Mode and PC Free Mode.
PC Free Mode
In PC Free Mode, you can use the pens or your finger to write or draw on the
projection surface simultaneously without connecting a computer. This lets you
annotate images from a document camera, iPad, DVD player, or other source.
PC Free Mode does not allow any printing or saving.
PC Interactive Mode
In PC Interactive Mode, you can select and open computer applications from the
BrightLink and then navigate them using an interactive pen or a finger, just as
you would with a mouse at your computer. Annotations can be made over any
application and can then be saved for later use.
To enable PC Interactive Mode:
1. Connect the projector to your computer using a USB cable.
2. Turn on the BrightLink and project
your computer screen.
3. Press the Menu button on the remote
control, select the Extended menu,
and press the Enter button.
To Next Page
Loading...
