Epson BrightLink 595Wi - Introduction to Your Projector; Projector Features

12
© 2016 IVS Computer Technology®, Inc. All rights reserved
How Does the BrightLink™ Interactive
Projector Work?
Getting Started
The BrightLink™ interactive projector is very easy to use! Simply turn on the
projector, interactive pens, and computer and the system is ready to go.
To turn on the BrightLink™ projector:
1. Select the Power button located on the remote control or the bottom of the
projector. The Power button will be solid blue once the projector is
completely powered on.
Projector Light Status
The lights on the BrightLink™ interactive projector indicate the status and let you
know when a problem has occurred.
Power
Light
Status
Light
Lamp
Light
Temp
Light
Status and Solution
Blue
Blue
Off
Off
Normal operation.
Blue
Flashing
blue
Off
Off
Warming up. Wait for an image to appear.
Blue
Off
Off
Off
Standby or sleep mode.
Blue
Flashing
blue
Off
Off
Shutting down. When the Status Light stops
flashing you can unplug the projector.
Blue
Varies
Off
Flashing
orange
Projector is too hot.
 Make sure the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
 Clean or replace air filter.
 Make sure environmental temperature is
not too hot.