24
© 2016 IVS Computer Technology®, Inc. All rights reserved
6. Press Enter to select Yes. A flashing green circle will appear in the upper
left corner of your projected image.
7. Touch and hold the center of the circle with your finger until the circle
disappears and another circle appears, then release it.
8. Touch and hold the center of the next circle and continue until all of the
circles have disappeared. When you get to the bottom of a column, the
next circle will appear at the top of a new column.
9. If the cursor location and your finger position do not match after calibration,
repeat the pervious steps to recalibrate.
NOTE: For the most accurate calibration make sure you touch the center of each
circle with the tip of your finger.
To Next Page
Loading...
