28
© 2016 IVS Computer Technology®, Inc. All rights reserved
5. To close Drawing Toolbar, select the icon at the bottom of the toolbar.
If you want to hide the toolbar automatically after drawing, select the
icon at the bottom of the Drawing Toolbar.
6. To show or hide the Command Bar, select the icon. You can also show
or hide the Command Bar from the projector’s Display menu.
Annotation Mode
In Annotation Mode you can project an image from a computer, document
camera, tablet, or other source and then annotate over the projected image.
To use Annotation Mode:
1. Project an image from a connected device.
2. Hover near or tap the projected image with an interactive pen or a finger.
3. Tap the Annotation Mode icon.
4. Annotate over the projected image or application.
5. To move the Drawing Toolbar to the other side of the screen tap the
icon on the opposite side of the screen. You can reposition the toolbar by
using the interactive pen or a finger to move the icon up or down.
6. To close the Drawing Toolbar, select the icon at the bottom of the
toolbar. If you want to hide the toolbar automatically after drawing, select
the icon at the bottom of the Drawing Toolbar.
7. To show or hide the Command Bar, select the icon. You can also show
or hide the Command Bar from the projector’s Display menu.
To Next Page
Loading...
