Epson CO-FH01 User Manual

Solving Remote Control Operation Problems
113
If the projector does not respond to remote control commands, try the
following steps until the problem is solved.
a
If you lose the remote control, you can order another one from Epson.
a
Check that the remote control batteries are installed correctly and have
power. If necessary, replace the batteries.
b
Check to see if a button on the remote control is stuck down, causing it
to enter sleep mode. Release the button to wake the remote control up.
c
Make sure you are operating the remote control within the reception
angle and range of the projector.
d
Make sure the projector is not warming up or shutting down.
e
Strong fluorescent lighting, direct sunlight, or infrared device signals
may be interfering with the projector's remote receivers. Dim the lights
or move the projector away from the sun or interfering equipment.
gg Related Links
• "Remote Control Operation" p.20

Epson CO-FH01 Specifications

General

Brightness	3000 lumens
Contrast Ratio	16, 000:1
Light Source	Lamp
Projection Technology	3LCD
Weight	2.4 kg
Color Reproduction	Up to 1.07 billion colors
Projection Size	30 - 300 inches
Resolution	1920 x 1080 (Full HD)
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Connectivity	HDMI, USB
Speaker	2W
Lamp Life	Up to 12, 000 hours (Eco mode)