Line of Dots Appears in All Scanned Images
Scanned Image Edges are Cropped
Parent topic: Solving Problems
Back of Original Image Appears in Scanned Image
If an image from the back of a thin original appears in your scanned image, make sure you selected the
correct Image Type setting for your original and select the Text Enhancement setting in Epson Scan.
Parent topic: Solving Scanned Image Quality Problems
Related references
Available Image Adjustments
Scanned Characters are Blurry
If characters in a scanned image appear blurry, adjust these Epson Scan settings (if available) and try
scanning again:
• Select the Text Enhancement setting.
• Adjust the Threshold setting.
• Increase the Resolution setting.
Parent topic: Solving Scanned Image Quality Problems
Related references
Available Image Adjustments
Characters are not Recognized During Conversion to Editable Text (OCR)
If characters in your scanned images are not recognized during OCR conversion, try these solutions:
• Make sure your original is straight.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select Text Enhancement
• Select the correct Image Type setting
• Adjust the Threshold setting
• Check the manual for your OCR software for any additional adjustments.
• Try using another software program, such as ABBYY FineReader, as the OCR engine. Start Epson
Scan and click File Save Settings. Select PDF as the File Type and click Options. Click the Text
85