Epson DS-870 - Roller Assembly Kit Codes; Cleaning Kit Codes

& “Placing Photographs” on page 45
Roller Assembly Kit Codes
Parts (the pickup roller and separation roller) should be replaced when the number of scans exceeds the service
number. You can check the latest number of scans on the control panel or in the Epson Scan 2 Utility.
A: pickup roller, B: separation roller
Part name Codes Life cycle
Roller Assembly Kit B12B819031
B12B819041 (China only)
200,000
*
* This number was reached by consecutively scanning using Epson test original papers, and is a guide to the replacement
cycle. The replacement cycle may vary depending on
dierent
paper types, such as paper that generates a lot of paper dust
or paper with a rough surface that may shorten the life cycle.
Related Information
& “Replacing the Roller Assembly Kit” on page 107
& “Resetting the Number of Scans on the Control Panel” on page 112
Cleaning Kit Codes
Use this when cleaning inside the scanner. is kit is composed of cleaning liquid and a cleaning cloth.
Part name Codes
Cleaning Kit B12B819291
Related Information
& “Cleaning Inside the Scanner” on page 102
User's Guide
Scanner Basics
20