Epson DS-870 - Device Information

Device Information
Status
is menu is only available when the icon is displayed on the home screen.
Indicates the following status. Press the OK button to see more detailed information.
❏ Roller Replacement Soon: e number of scans is close to the life cycle of the rollers. Prepare
replacement rollers.
“Roller Assembly Kit Codes” on page 20
❏ Roller Replacement: e number of scans exceeds the life cycle of the rollers. Replace the rollers.
“Replacing the Roller Assembly Kit” on page 107
❏ Glass Cleaning: Dirt has been detected on the glass surface inside the scanner. Clean the inside of
the scanner. You can continue scanning by pressing the
y button.
“Cleaning Inside the Scanner” on page 102
❏ Regular Cleaning: It is time to clean inside the scanner.
“Cleaning Inside the Scanner” on page 102
Serial Number
Displays the serial number of the scanner.
Current Version
Displays the current rmware version.
Total Number of Scans
Displays the total number of scans.
Number of 1-Sided Scans
Displays the number of single-sided scans.
Number of 2-Sided Scans
Displays the number of double-sided scans.
Number of Scans of Carrier Sheet
Displays the number of scans using a Carrier Sheet.
Number of Scans After Replacing Roller
Displays the number of scans aer replacing the roller assembly kit.
Press the OK button to reset the number
aer
replacing the roller assembly kit.
Number of Scans After Regular Cleaning
Displays the number of scans aer performing regular cleaning.
Press the OK button to reset the number aer performing regular cleaning.
User's Guide
Menu Options on the Control Panel
91