Epson DS-870 - Mixture of Originals

4. Slide the edge guides to t the edge of the envelopes making sure there are no gaps between the envelopes and
the edge guides. Otherwise, the envelopes may be fed skewed.
Note:
❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application.
❏ To scan envelopes, set the appropriate setting in the Epson Scan 2 window. When you are using Document Capture
Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.
Select Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the envelope
from the ADF, reload it, press the
d button, and then select DFDS Function (Double Feed Detection Skip function)
on the control panel to set it to On. is disables Detect Double Feed for the next scan, and you can scan again. e
DFDS Function only disables Detect Double Feed for one sheet.
Related Information
&
“Required Settings for Special Originals in Epson Scan 2” on page 71
Mixture of Originals
Specications of Originals that are a Mixture of Dierent Sizes
You can load a mixture of originals from 50.8×50.8 mm (2.0×2.0 in.) to A4 (or Letter) size. You can also load a
mixture of paper types or thickness.
c
Important:
❏ When placing and scanning originals that are a mixture of
dierent
sizes, originals may be fed askew because
not all of the originals are supported by edge guides.
❏ Originals may be jammed or fed askew if you set dierent types or very dierent sizes of originals, such as in the
following cases.
· in paper and ick paper
· A4 size paper and card size paper
If originals are fed askew, check whether or not the scanned image is available.
Note:
❏ If originals are jammed or are not fed correctly, enabling Slow mode may improve feeding.
❏ Alternatively, you can scan originals of
dierent
paper sizes and types by loading them one by one using Automatic
Feeding Mode.
User's Guide
Specications of Originals and Placing Originals
50