3. Load the envelopes into the input tray facing down making sure that the opened edge (ap side) of the
envelope is facing to the side. For envelopes with the opened edge
(ap
side) on the shorter side, you can load
the envelope with the opened edge (ap side) facing up.
Slide the envelopes into the ADF until they meet resistance.
c
Important:
Do not load envelopes with adhesives on them.
Note:
❏ Envelopes that are not opened by cutting sharply at the ap edge may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the ap open and facing up.
User's Guide
Specications of Originals and Placing Originals
49
To Next Page
Loading...
