Note:
❏ You can start scanning immediately on the Select Job screen by pressing the
]
button.
❏ Press the
d
button to make Scanner Settings.
· Slow: Slows down the scanning speed. Use this to scan originals that are likely to jam, for example thin paper.
· DFDS Function: Skips double feed detection once and continues scanning. Use this to scan originals that are
detected as double feeds, for example plastic cards or envelopes.
· Paper Protection: Reduces damage to the originals by stopping scanning immediately when a feeding error occurs.
· Detect Glass Dirt: Detects dirt on the glass surface inside the scanner.
Aer making Scanner Settings, press
to return to the Select Job screen.
4. Press the OK button to view the job settings.
5. Check the job settings.
You can scroll the screen using the
u
or
d
button.
User's Guide
Basic Scanning
55
To Next Page
Loading...
