Originals longer than A4 (297 mm) to Legal (355.6 mm)
Extend the input tray, slide out the output tray extension of the Flatbed Scanner Dock, and then raise the stopper.
Note:
❏ Make sure you pull out and extend the output tray extensions so that they are a little bit longer than the length of the
original, and raise the stopper so that the ejected originals can be stacked comfortably on the output tray.
❏ e stopper can move forward and backward on the central output extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
Originals longer than Legal (355.6 mm)
Do not extend the input tray extension and output tray extensions, and do not raise the stopper.
User's Guide
Using the Flatbed Scanner Dock
97
To Next Page
Loading...
