Installation Guide
78
k
Turn the adjustment dials on the Touch Unit to move the pointers ( ) ( ) so that they
overlap with the target (
) ( ) of the same color on either side
When you turn the adjustment dial clockwise, the pointer moves diagonally up towards the center of
the projected image.
When you turn the adjustment dial counterclockwise, the pointer moves diagonally down away from
the center of the projected image.
When the pointers overlap in the correct position, the colors become solid ( ) ( ).
c
•
If you hear a clicking sound from the dial, the pointer does not move any further.
•
When turning the dials, make sure shadows from your arm or body do not overlap with the
markers.
To Next Page
Loading...
