Epson EB-1780W User Manual

Replacing the Remote Control Batteries
150
The remote control uses two AA manganese or alkaline batteries. Replace the
batteries as soon as they run out.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a
Remove the battery cover as shown.
b
Remove the old batteries.
c
Insert the batteries with the + and – ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
d
Replace the battery cover and press it down until it clicks into place.

Epson EB-1780W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	10, 000:1
Weight	1.8 kg
Display Technology	3LCD
Throw Ratio	1.04 - 1.26:1
Screen Size	30 inches - 300 inches
Wireless Connectivity	Yes
Dimensions	292‎ x 213 x 44 mm (Width x Depth x Height)
Operating Temperature	5°C - 35°C
Brightness	3000 lumens
Lamp Life	10, 000 hours (ECO mode)
Connectivity	HDMI, USB, Wireless LAN
Zoom Ratio	1.2x
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Projection Distance	0.7 m - 8.4 m
Speakers	1W Mono