Epson EB-1780W User Manual

Projector Connections
25
If your image colors appear incorrectly, you may need to change the Input
Signal setting in the projector's Signal menu.
s Signal > Advanced > Input Signal
gg Related Links
• "Input Signal Settings - Signal Menu" p.119
• "Projector Setup Settings - Extended Menu" p.123
Connecting to a Composite Video Source
If your video source has a composite video port, you can connect it to the
projector using a RCA-style video or A/V cable.
You can play sound through the projector's speaker system by connecting a
stereo mini-jack audio cable.
a
Make sure the audio cable is labeled "No resistance".
a
Connect the cable with the yellow connector to your video source's
yellow video output port.
b
Connect the other end to the projector's Video port.
c
Connect the audio cable to your video source's audio-out ports.
d
Connect the other end to the projector's Audio port.
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to
the projector.
gg Related Links
• "USB Device Projection" p.25
• "Connecting to a USB Device" p.26
• "Disconnecting a USB Device" p.26
USB Device Projection
You can project images and other content without using a computer or video
device by connecting any of these devices to your projector:
• USB flash drive
• Digital camera or smartphone
• USB hard drive
• Multimedia storage viewer

Epson EB-1780W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	10, 000:1
Weight	1.8 kg
Display Technology	3LCD
Throw Ratio	1.04 - 1.26:1
Screen Size	30 inches - 300 inches
Wireless Connectivity	Yes
Dimensions	292‎ x 213 x 44 mm (Width x Depth x Height)
Operating Temperature	5°C - 35°C
Brightness	3000 lumens
Lamp Life	10, 000 hours (ECO mode)
Connectivity	HDMI, USB, Wireless LAN
Zoom Ratio	1.2x
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Projection Distance	0.7 m - 8.4 m
Speakers	1W Mono