Epson EB-1780W User Manual

Shutting Off the Image and Sound Temporarily
75
You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the
point that you stopped it.
a
If you want to display an image such as a company logo or picture
when the [A/V Mute] button is pressed, you can select the screen
displayed in the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute
a
Press the [A/V Mute] button on the remote control to temporarily stop
projection and mute any sound.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• You can also stop projection using the A/V Mute slide lever on the
projector.
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature in the projector's ECO
menu.
s ECO > Lens Cover Timer
s ECO > A/V Mute Timer
• The lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.123
• "Projector Setup Settings - ECO Menu" p.131

Epson EB-1780W Specifications

General

Resolution	WXGA (1280 x 800)
Contrast Ratio	10, 000:1
Weight	1.8 kg
Display Technology	3LCD
Throw Ratio	1.04 - 1.26:1
Screen Size	30 inches - 300 inches
Wireless Connectivity	Yes
Dimensions	292‎ x 213 x 44 mm (Width x Depth x Height)
Operating Temperature	5°C - 35°C
Brightness	3000 lumens
Lamp Life	10, 000 hours (ECO mode)
Connectivity	HDMI, USB, Wireless LAN
Zoom Ratio	1.2x
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Projection Distance	0.7 m - 8.4 m
Speakers	1W Mono