Image Aspect Ratio
66
The projector can display images in different width-to-height ratios called
aspect ratios. Normally, the input signal from your video source determines
the image's aspect ratio. However, for certain images you can change the
aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Signal menu.
gg Related Links
• "Changing the Image Aspect Ratio" p.66
• "Available Image Aspect Ratios" p.66
• "Projected Image Appearance with Each Aspect Mode" p.67
• "Input Signal Settings - Signal Menu" p.173
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Aspect] button on the remote control.
c
To cycle through the available aspect ratios for your input signal, press
the [Aspect] button repeatedly.
a
To display images without black bars, set Resolution to Wide or
Normal in the projector’s Signal menu according to the computer’s
resolution.
gg Related Links
• "Input Signal Settings - Signal Menu" p.173
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input
signal from your image source.
a
• Black bands and cropped images may project in certain aspect ratios,
depending on the aspect ratio and resolution of your input signal.
• The Auto aspect ratio setting is available only for HDMI image
sources.
• Note that using the aspect ratio function of the projector to reduce,
enlarge, or split the projected image for commercial purposes or for
public viewing may infringe upon the rights of the copyright holder
of that image based on copyright law.
For projectors with a resolution of WXGA (1280 × 800)
Aspect mode Description
Auto Automatically sets the aspect ratio according to the
input signal and the Resolution setting.
Normal Displays images using the full projection area and
maintains the aspect ratio of the image.
16:9 Converts the aspect ratio of the image to 16:9.
Full Displays images using the full size of the projection
area, but does not maintain the aspect ratio.
Zoom Displays images using the full width of the projection
area and maintains the aspect ratio of the image.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
