Details of Updated Projector Menus (Version 2.00)
14
Refer to these sections for details about projector menu changes.
gg Related Links
• "Light Source Calibration Menu" p.14
Light Source Calibration Menu
The Light Source Calibration menu is added to the Reset menu.
Previous Reset Menu (Version 1.00)
Top menu Sub menu Items or setting values
Reset Reset All Memories
Reset All Config
New Reset Menu (Version 2.00)
Top menu Sub menu Items or setting values
Reset Reset All Memories
Light Source Calibration Run Now
Run Periodically
Schedule Settings
Last Run
Reset All Config
You can use the Light Source Calibration menu to run a utility to correct the
differences in the White Balance and the Brightness Level for the light
source. We recommend running this utility periodically.
• Run Now: Starts light source calibration.
You cannot start it in the following conditions.
• Within 30 minutes of turning off the projector.
• When the brightness has been automatically dimmed due to a high
temperature environment.
• Run Periodically: When you select On, Light Source Calibration is
performed for every 100 hours of use. If you select Off to maintain image
matching with other Multi-Projection projectors, use the Run Now setting
instead or use the scheduling feature below to perform Light Source
Calibration periodically.
• Schedule Settings: Displays a schedule setting screen where you can set up
Light Source Calibration to run calibration periodically.
• Last Run: Displays the last date and time when you performed Light
Source Calibration.
To Next Page
Loading...
Need help?
General
