Details of Updated Projector Menus (Version 2.10)
16
Previous Extended Menu (Version 1.00)
Top menu Sub menu Items or setting
values
Extended Operation Advanced BNC Sync
Termination
Remote Control
Type
Beep
Indicators
Instant Off
Inv Direction
Button
AC Voltage
Monitoring
Lens Type
New Extended Menu (Version 2.10)
Top menu Sub menu Items or setting
values
Extended Operation Advanced BNC Sync
Termination
Remote Control
Type
Beep
Indicators
Log Save
Destination
Instant Off
Inv Direction
Button
Top menu Sub menu Items or setting
values
AC Voltage
Monitoring
Lens Type
Select the destination where you want to save the operation logs for the
projector.
• Select USB and Internal Memory to save the logs to a USB storage device
as well as the projector's internal memory.
• Select Internal Memory to save the logs to the projector's internal memory.
Reset All (Factory Default) Menu
The Reset All (Factory Default) menu is added to the Reset menu.
Previous Reset Menu (Version 1.00 and Version 2.00)
See Light Source Calibration Menu updated in version 2.00.
New Reset Menu (Version 2.10)
Top menu Sub menu Items or setting values
Reset Reset All Memories
Light Source Calibration Run Now
Run Periodically
Schedule Settings
Last Run
Reset All Config
Reset All (Factory Default)
You can use the Reset All (Factory Default) menu to reset all projector's
settings.