Epson EB-L1505UH Update Information

Details of Updated Projector Menus (Version 3.00)
19
a
If you have already made corrections using Point Correction, you may
not be able to change Interpolation if the amount of correction is too
large.
Adjustment Level for Color Matching
The All setting value is added to the Adjustment Level menu from Extended
> Multi-Projection > Screen Matching > Color Matching.
Previous Settings Menu (Version 2.10)
Sub menu Items or setting values
Color Matching Adjustment Level 1, 2, 3, 4, 5, 6, 7, 8
New Settings Menu (Version 3.00)
Sub menu Items or setting values
Color Matching Adjustment Level All, 1, 2, 3, 4, 5, 6, 7, 8
There are eight levels from All, white, through gray, and up to black. When
you select All, you can adjust the color for each color in Adjustment Level 2
to 8 at the same time. (Once the red, blue, and green values are at their
maximum or minimum position at any level, you cannot make any further
adjustments.) Select Adjustment Level 1 to 8 to adjust each level individually.
Enable and Disable Color Calibration
You can enable or disable color calibration in the Color Calibration setting.
You need to set the Color Calibration setting to On to execute the auto
adjustment function for color calibration.
Previous Settings Menu (Version 2.10)
Top menu Sub menu Items or setting values
Extended Color Calibration Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
New Settings Menu (Version 3.00)
Top menu Sub menu Items or setting values
Extended Color Calibration Color Calibration On, Off
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
Lens Calibration History
The History menu is added to the Lens Calibration menu. You can use the
History menu to check the lens calibration history.
Previous Settings Menu (Version 2.10)
Top menu Sub menu Items or setting values
Extended Operation Lens Calibration Start

Epson EB-L1505UH Specifications

General

Brand	Epson
Model	EB-L1505UH
Category	Projector
Language	English