Adjusting the Sharpness
42
You can fine-tune various aspects of the quality of your projected images.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Image menu and press .
d
Select Sharpness and press .
e
Do the following as necessary for each setting:
• To adjust the outline of the image, adjust the Sharpness setting.
• To reduce flickering in images, adjust the Noise Reduction setting.
• To reduce flickering in MPEG images, adjust the MPEG Noise
Reduction setting.
f
Press or to exit the menus.
To Next Page
Loading...
Need help?
General
