136
Projector Indicators Status
Indicator and status Problem and solutions Indicator and status Problem and solutions
Power: Off Lamp has a problem. Power: Off Power error (Ballast). Turn the projector off, unplug it,
and contact Epson for help.
Status: Flashing blue Status: Flashing blue
• Check to see if the lamp is burned out, broken, or
installed incorrectly. Reseat or replace the lamp as
Lamp: Lit orange Lamp: Lit orange
necessary.
Temp: Off Temp: Lit orange
• Clean the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Wireless LAN indicator Problem and solutions
Extended menu.
and status
s Extended > Operation > High Altitude Mode
Lit blue Wireless LAN is available.
• If the problem persists, unplug the projector and
Flashing blue (quickly) Connecting to a device.
contact Epson for help.
Lamp cover has a problem.
Flashing blue (slowly) An error has occurred. Turn off the projector and restart
it.
• Check that the lamp and the lamp cover are securely
If this does not solve the problem, contact Epson for
installed. The lamp does not turn on if the lamp and
help.
the lamp cover are not installed correctly.
Off Wireless LAN is not available. Make sure the Wireless
Power: Flashing blue Replace the lamp soon to avoid damage. Do not
LAN settings are correct.
continue using the projector.
Status: Indicator status
varies
Lamp: Flashing orange
If the indicators display a pattern not listed in the table above, turn the
Temp: Indicator status
projector off, unplug it, and contact Epson for help.
a
varies
Power: Off A fan or sensor has a problem. Turn the projector off,
gg Related Links
unplug it, and contact Epson for help.
Status: Flashing blue
• "Cleaning the Air Filter and Vents" p.125
Lamp: Off
• "Replacing the Air Filter" p.125
Temp: Flashing orange
• "Replacing the Lamp" p.127
Power: Off Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
To Next Page
Loading...
Need help?
General
