77
Projector Security Features
g
Make a note of the password and keep it in a safe place.
You see the prompt "Change the password?".
Selecting Password Security Types
After setting a password, you see this menu, allowing you to select the
c
Select Yes and press [Enter].
password security types you want to use.
If you select No, the Password Protection setting menu is
displayed again.
a
d
Hold down the [Num] button on the remote control and use the
numeric buttons to set a four-digit password.
If you do not see this menu, hold down the [Freeze] button on the remote
control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
• To prevent changes to the User's Logo screen or related display settings,
select On as the User's Logo Protection setting.
• To prevent changes to network settings, select On as the Network
The password displays as **** as it is entered. A confirmation prompt is
Protection setting.
displayed when you enter the fourth digit.
You can attach the password protect sticker to the projector as an additional
theft deterrent.
e
Enter the password again.
You see the message "Password accepted". If you enter the password
Be sure to keep the remote control in a safe place; if you lose it, you will
incorrectly, a message is displayed prompting you to re-enter the
not be able to enter the password.
a
password.
f
Press [Esc] to return to the menu.
To Next Page
Loading...
Need help?
General
