153
Supported Monitor Display Resolutions
The table here lists the compatible refresh rate and resolution for each
Signal Refresh rate (Hz) Resolution (dots)
compatible video display format.
VGA 60/72/75/85 640 × 480
SVGA 60/72/75/85 800 × 600Component Signals (Analog RGB)
XGA 60/70/75/85 1024 × 768
For EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-W04/EB-
X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300
WXGA 60 1280 × 768
60 1366 × 768
Signal Refresh rate (Hz) Resolution (dots)
60/75 1280 × 800
VGA 60/72/75/85 640 × 480
WXGA+ 60 1440 × 900
SVGA 60/72/75/85 800 × 600
SXGA 70/75 1152 × 864
XGA 60/70/75/85 1024 × 768
60 1280 × 960
WXGA 60 1280 × 768
60 1280 × 1024
60 1366 × 768
SXGA+ 60 1400 × 1050
60/75/85 1280 × 800
WXGA+ 60/75/85 1440 × 900
Even when signals other than those mentioned above are input, it is likely that
WXGA++ 60 1600 × 900
the image can be projected. However, not all functions may be supported.
SXGA 70/75/85 1152 × 864
Component Video
60/75/85 1280 × 960
60/75/85 1280 × 1024
Signal Refresh rate (Hz) Resolution (dots)
SXGA+ 60/75 1400 × 1050
SDTV (480i/480p) 60 720 × 480
WSXGA+ * 60 1680 × 1050
SDTV (576i/576p) 50 720 × 576
UXGA 60 1600 × 1200
HDTV (720p) 50/60 1280 × 720
WUXGA ** 60 1920 × 1200
HDTV (1080i) 50/60 1920 × 1080
* WSXGA+ is available only for EB-U32/EB-W32/EB-W31/EB-U04/EB-
Composite Video
W04/EB-U130/EB-W130 and compatible only when Wide is selected as the
Resolution setting in the projector's Signal menu.
Signal Refresh rate (Hz) Resolution (dots)
** WUXGA is available only for EB-U32/EB-U04/EB-U130.
TV (NTSC) 60 720 × 480
For EB-S31/EB-S04/EB-S130/EB-S300
TV (SECAM) 50 720 × 576
TV (PAL) 50/60 720 × 576
To Next Page
Loading...
Need help?
General
