92
Controlling a Networked Projector Using a Web Browser
follow the on-screen instructions to select settings.
Once you have connected your projector to your network, you can select
• You cannot select the following settings using a Web browser.
projector settings and control projection using a compatible Web browser.
Test Pattern, Pointer Shape, User Button, User's Logo,
a
This lets you access the projector remotely.
Language, Reset Lamp Hours and all the settings in the
Network menu
• Make sure the computer and projector are connected to the network.
• You can select the following settings only using a Web
When projecting images via a wireless LAN, connect in Advanced
browser.
a
connection mode.
• SNMP Community Name (up to 32 alphanumeric
• The Web setup and control features support Internet Explorer 8.0 or
characters)
later, and Safari on networks that do not use a proxy server for
• Monitor Password (up to 16 alphanumeric characters)
connection. Use Safari for OS X. You cannot select all of the
• HTTP port (port number used for Web Control except for
projector menu settings or control all projector functions using a
80 [default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357,
Web browser.
10000, 10001, 41794)
• If you set Standby Mode to Communication On in the projector's
ECO menu, you can use a Web browser to select settings and control
projection even if the projector is in standby mode (when the power
e
To control projection remotely, select the Web Remote option.
is off).
a
Make sure the projector is turned on.
b
Start your Web browser on a computer connected to the network.
c
Type the projector's IP address into the browser's address box and press
the computer's Enter key.
You see the Web Control screen.
• You may need to log in before you see the Web Control screen.
If you see a log in window, enter your user name and
a
password. (The default user name is EPSONWEB and the
default password is admin.)
• You can change the password in the Web Control Password
menu in the projector's Network menu.
s Network > Basic > Web Control Password
d
To select projector menu settings, select the name of the menu and
To Next Page
Loading...
Need help?
General
