53
Color Mode
press the [Color Mode] button repeatedly.
The projector offers different Color Modes to provide optimum brightness,
You can also set the Color Mode setting in the projector's Image
contrast, and color for a variety of viewing environments and image types.
menu.
a
You can select the mode designed to match your image and environment, or
experiment with the available modes.
gg Related Links
gg Related Links
• "Image Quality Settings - Image Menu" p.101
• "Changing the Color Mode" p.53
• "Available Color Modes" p.53
• "Setting Auto Iris" p.53
Available Color Modes
You can set the projector to use these Color Modes, depending on the input
Changing the Color Mode
source you are using:
You can change the projector's Color Mode using the remote control to
Color Mode Description
optimize the image for your viewing environment.
Presentation Best for color presentations and television images in a
bright room, with vivid images in sharp contrast.
a
Turn on the projector and switch to the image source you want to use.
Dynamic Best for projecting in a bright room. This is the
brightest mode.
b
Press the [Color Mode] button on the remote control to change the
Color Mode.
Cinema Best for movies projected in a dark room with natural
tone images.
sRGB Best for still images projected in a bright room that
conform to the sRGB color standard.
Blackboard Best for presentations onto a green chalkboard
(adjusts the colors accordingly).
Setting Auto Iris
In Dynamic or Cinema color modes, you can turn on Auto Iris to
automatically optimize the image based on the brightness of the content.
The name of the Color Mode appears briefly on the screen and then
image appearance changes.
a
Turn on the projector and switch to the image source you want to use.
c
To cycle through all of the available Color Modes for your input signal,
To Next Page
Loading...
Need help?
General
