Epson EB-X04 User Manual

44
Image Shape
control panel, the Quick Corner adjustment screen is displayed.
e
Select Quick Corner and press [Enter]. Press [Enter] again if necessary.
• If you see this screen, you cannot adjust the shape any further
in the direction indicated by the gray triangle.
a
You see the Quick Corner adjustment screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press [Enter].
• To reset the Quick Corner corrections, hold down [Esc] for
about 2 seconds while the Quick Corner adjustment screen is
displayed, and select Reset Quick Corner. Select Switch to
H/V-Keystone to switch the image shape correction method to
H/V-Keystone.
g
Press the arrow buttons to adjust the image shape as necessary.
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
When you press [Enter], the Quick Corner adjustment screen is
displayed.
i
When you are finished, press [Esc].
The Keystone setting is now set to Quick Corner in the projector's Settings
menu. The next time you press the keystone adjustment buttons on the

Epson EB-X04 Specifications

General

Brand	Epson
Model	EB-X04
Category	Projector
Language	English