Changing the aspect ratio for computer images (EB-W10/W9)
You can change the aspect ratio as follows. For EB-W10/W9, the projection size is 1280 x 800 dots (aspect ratio 16:10) due to WXGA panel resolution. When
projecting onto 16:9 screens, set the Aspect Mode to 16:9.
Aspect Mode Operation Projection example
Normal
Projects to the full projection size retaining the aspect ratio of
the input image.
When a 1024x768 signal is input
Auto (EB-W10 only)
Displayed only when the source is
HDMI.
Projects in an appropriate aspect ratio based on information
from the input signal.
16:9
Projects to the full projection size at an aspect ratio of 16:9. When a 1024x768 signal is input
Full
Project at full size. When a 1024x768 signal is input
Functions for Enhancing Projection
30
To Next Page
Loading...
