63
Note: You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.
Note: Image quality may decline after you perform Panel Alignment.
Note: Images for pixels that extend beyond the edge of the projected screen are not displayed.
1. Turn on the projector.
2. Press the settings button on the remote control.
3. Select the Settings menu and press Enter.
You see a screen like this:
4. Select the Panel Alignment setting and press Enter.
5. Set the Panel Alignment setting to On.
6. Select the Select Color setting and choose one of the following:
• R to adjust the red color convergence.
• B to adjust the blue color convergence.
To Next Page
Loading...
