64
7. Select the Pattern Color setting and choose one of the following as the grid color you want to use
when making adjustments. (The available color varies depending on the Select Color setting.)
• R/G/B to display the grid color in white.
• R/G to display the grid color in yellow. (R/G is only displayed when Select Color is set to R.)
• G/B to display the grid color in cyan. (G/B is only displayed when Select Color is set to B.)
8. Select Next and press Enter.
9. Select the Select Method setting and choose one of the following:
• Select Whole Panel to adjust the whole panel at the same time, and continue with the next step.
• Select Four Corners to adjust the corners of the panel one at a time, and skip to step 13.
10. Use the directional pad on the remote control to adjust the color alignment of the color you selected
for the Select Color setting.
11. When you are finished adjusting the screen, press Enter.
Note: Adjustment affects the grid lines in the entire screen.
12. Select one of the following options:
• Select Four Corners to fine-tune your adjustments.
• Select Exit to finish making adjustments.
13. Use the directional pad on the remote control to adjust the color alignment in the corner of the
screen.
14. Press the Enter button to move to the next corner of the screen.
15. When you are finished adjusting each corner of the screen, press Enter.
16. Do one of the following:
• If your projector's panel alignment is now correct, select Exit and press Enter to return to the
Panel Alignment menu.
• If your projector needs additional panel alignment, select Fine Adjustment and press Enter. Use
the directional pad on the remote control to highlight the corner of any misaligned box on the
screen, press Enter, make any necessary adjustments, and press Enter again. Repeat this step
as necessary for the other intersections.
Parent topic: Adjusting Projector Features
To Next Page
Loading...
