Epson EH-LS800B - Adjusting Image Color When Projecting on to a Wall

Adjusting Image Color when Projecting on to a Wall
41
When projecting on to a wall, you can use the preset color correction to
compensate for the color of the wall.
You can make further detailed color adjustments in the projector's Picture
menu.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
a
This button is not available when the input source is set to
HDMI3 (Game). Press the button on the remote control to
return to the Android TV home screen, and then perform the
procedure.
c
Select the Installation menu and press the [Enter] button.
d
Select Adjust color and press the [Enter] button.
e
Select the color that is closest to the color of the wall, select OK, and
then press the [Enter] button.