Epson EH-LS800B - Adjusting the Light Source Brightness Based on the Brightness of Your Surroundings

Adjusting the Light Source Brightness Based on the Brightness of Your Surroundings
44
You can turn on Adaptive Light Output to automatically adjust the brightness
of your projector's light source based on the brightness of the surroundings.
a
• You can also adjust the brightness of your projector's light source
manually by using the remote control. Manually set values take
priority over automatically set values.
• This setting is not an absolute value as it varies relative to the
manually set value.
• This function may not work properly if you use the projector in
conditions with bright fluorescent lights or in direct sunlight.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
a
This button is not available when the input source is set to
HDMI3 (Game). Press the button on the remote control to
return to the Android TV home screen, and then perform the
procedure.
c
Select the Picture menu and press the [Enter] button.
d
Select the Adaptive Light Output menu and press [Enter] to enable the
setting.
e
Press to exit the menus.
gg Related Links
• "Image Quality Settings - Picture Menu" p.76