Basic Operations
32
c
•
You can adjust the volume by pressing the buttons when the gauges are not displayed.
s p.32
•
You can set H/V-Keystone from the Configuration menu. s Settings - Keystone - V-Keystone/H-
Keystone p.68
Adjusting the Volume
You can adjust the volume by using the buttons on the remote control or the buttons
on the control panel.
Remote control Control panel
c
•
You can also adjust the volume from the Configuration menu. s Settings - Volume p.68
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.68
•
You cannot adjust the volume of Bluetooth audio devices from the projector.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.
Hiding the Image and Muting the Audio Temporarily (A/V Mute)
You can temporarily stop projection and mute any sound by pressing the button on the remote control
or by closing the lens cover. To turn the image and sound back on, press the
button again or open the
lens cover.
Remote control Main unit
c
•
Because a movie continues to play even when it is hidden, you cannot return to the point at which you
hid the image and muted the audio.
•
The button also switches between muting and playing the audio.
To Next Page
Loading...
Need help?
General
