Basic Operations
29
Adjusting the Projected Image
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the
button on the remote control to display the test pattern.
Press the button again to end the test pattern display.
Adjusting the Focus
Turn the focus ring to adjust the focus.
Adjusting the Projection Size
Turn the zoom ring to adjust the size of the projected image.
Adjust the Height of the Image
Press the foot release lever to extend the front adjustable foot. You can tilt the projector up to 12° to adjust
image height.
To Next Page
Loading...
