Configuration Menu
69
Function Menu/Settings Explanation
Lock Setting
Child Lock On, Off
This locks the
button on the
projector's control panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the
button for approxi-
mately three seconds. You can still
turn off the device using the
button, or perform operations with
the remote control as usual.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com-
plete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Di‐
rect Power On is set to On.
Control Panel Lock Full Lock, Partial Lock, Off
Full Lock: Disables all of the projec-
tor's buttons.
Partial Lock: Disables all of the pro-
jector's buttons except for the
button.
is displayed on the screen if but-
tons are pressed while the projector
is locked. To unlock, press and hold
the
button on the control panel
for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.
User Button
Fine/Fast, 2D-to-3D Conversion, Power Consumption,
Info, Display the QR Code (EH-TW5350 only)
Select a Configuration menu item to
assign to the
button on the re-
mote control. By pressing the
button, the assigned menu item se-
lection/adjustment screen is dis-
played, allowing you to make one-
touch settings/adjustments.
Memory
Load Memory Memory1 to Memory10 Loads the settings saved in Save
Memory to adjust the image.
Save Memory Memory1 to Memory10
Saves the settings made in Image to
a memory.
Erase Memory Memory1 to Memory10 Erases a saved memory.
Rename Memory Memory1 to Memory10, De-
fault, DVD, VCR, SDTV, HDTV,
Cinema, Sports, Music, Anime,
Game, Customized
Changes the saved memory name.
Reset
Yes, No
Resets all Settings except for Audio
Out Device, Power On Link, Power
Off Link, User Button, and Memo‐
ry.
To Next Page
Loading...
