Epson EH-TW6000 User Manual

Useful Functions
53
Connecting with WirelessHD (EH-TW6000W
Only)
Installing and Connecting the WirelessHD Transmitter
You can use the included WirelessHD Transmitter to wirelessly receive image and sound data as well as control
signals.
This eliminates the need to connect any cables to the projector, which is convenient when you are unable to
place the projector near your AV devices.
Connect the Transmitter to the HDMI output of any AV device or AV System capable of HDMI playback.
Projector Transmitter Player
c
•
The receiver is located within the intake vent of the projector and therefore cannot receive any signals
directly from the rear. Set up the transmitter so that the front of the projector is facing the transmitter.
•
Place the WirelessHD Transmitter on a level surface.
•
You can view the signal strength from the WirelessHD settings menu. s Settings - WirelessHD -
Reception p.61
WirelessHD Settings
Changing the source
Press the button on the remote control to change the
source.
c
When receiving WirelessHD images, make sure Wire-
lessHD is set to On from the configuration menu.
s Settings - WirelessHD p.61

Epson EH-TW6000 Specifications

General

Matrix size	0.61 \
Projection distance	2.95 - 4.8 m
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	- \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	± 30 °
Aspect ratio	16:9
RS-232 ports	1
Connectivity technology	Wired
Focal length range	18.2 - 29.2 mm
Aperture range (F-F)	1.51 - 1.99
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	5000 h
DVI port	No
AC (power) in	Yes
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Supported video modes	1080p
Supported graphics resolutions	1920 x 1080 (HD 1080)
RMS rated power	20 W
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	274 W
Noise level	- dB
Noise level (economic mode)	24 dB

Weight and Dimensions

Weight	6000 g