25
Basic Operation > Adjusting the Display
Keystone
When the projector is not set at right angles to a screen, the display
distorts in the shape of a trapezoid. This distortion can be corrected.
A
Press the [v] or [w] buttons.
Images can be corrected without distortion when the projector is tilted to a
maximum of ±15°.
p
You can correct only vertical distortion with this function.
Horizontal distortion cannot be corrected.
p
• Screen size changes when keystone correction is
performed.
• If the images become uneven in appearance after keystone
correction is performed, decrease the sharpness setting.
([Menu] button
→
"Image"
→
"Picture Quality"
→
"Sharpness") s "Image menu" P.35
Approx. 15° above Approx. 15° below
15°
15°
To Next Page
Loading...
