22
Projecting S-Video Images
Use an S-Video cable (commercially-available) to connect the video source to
the S-Video port on the left side of the projector.
Tip :
If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [S-Video/Video] button on the remote
control to select the S-Video port as the input source. (p.30)
Projecting Component Video Images
Use the optional component video cable to connect the video source to the
Computer/Component Video port on the left side of the projector. See
"Appendices: Optional Accessories" (p.80)
S-Video cable
(commercially-available)
To S-Video port
To S-Video output port
Component video cable
(optional)
To component video output port
To Computer/
Component Video port
(blue)
Connecting to a Video Source
To Next Page
Loading...
