45
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1
Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the centre
point for the area to be enlarged will
appear on the screen.
2
Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3
When [ ] is pressed, the image is
enlarged with the cross as its centre. When [ ] is pressed, the
enlarged picture is then reduced.
The enlargement ratio will appear at the bottom-right of the screen.
You can scroll around the image by pressing the [ ], [ ], [ ] and [ ]
buttons.
To cancel the E-Zoom, press the [ESC] button.
Tip :
The selected area can be enlarged to between 1–4 times, in 25 steps of x0.125.
E-Zoom
ESCAuto
Enter
Remote control
Cross
Shows enlargement ratio
Functions for Enhancing Projection
To Next Page
Loading...
