Epson EMP-52 - Playing Sound from the Video Equipment

24
Playing Sound from the Video Equipment
The projector has a single built-in speaker with a maximum output of 1 W. You
can output sound from the video equipment through the projector's built-in
speaker by connecting the video equipment's audio output port and the Audio
port (RCA monaural jack) on the left side of the projector using an RCA audio
cable (commercially-available).
Use the following procedure to adjust the volume of the sound output.
Procedure
1
Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.56)
RCA audio cable
(commercially-available)
To audio output port
To Audio port
+
-
+
-
Video
Audio
Setting
Advanced
About
: Select: Return : Adjust
Reset All
Volume
Tone
:
:
Reset
Execute
10
0
:
Audio Input
Computer Video
Connecting to a Video Source