74
Replacing Consumables
This section describes how to replace the remote control battery, the lamp and
the air filter.
Use the following type of battery as a replacement.
1 CR2025 lithium battery
Caution :
Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the
battery.
Procedure
1
Remove the battery holder.
While pushing the catch of the battery
holder inwards, pull the battery holder out.
2
Remove the old battery and insert
the new battery.
Check the position of the (+) mark inside
the battery holder to ensure that that
battery is inserted the correct way.
3
Insert the battery holder into the
remote control.
Push the battery holder in until it clicks.
Tip :
Dispose of used batteries in accordance with local
waste disposal regulations.
Inserting the Battery
Catch
Old battery
New
battery
mark
Maintenance
To Next Page
Loading...
