53
• RGB : Sets the colour intensity for each RGB (red/
green/blue) colour in the image.
Press the [Enter] button, select "R" (red),
"G" (green) or "B" (blue) and make the
adjustment in the colour adjustment sub-
menu that appears.
You can adjust the colours while viewing the
results on the screen.
(This item cannot be selected if "sRGB" has been
selected as the "Color Mode" setting in the "Video"
menu.)
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to "ON", the projected images are horizontally
reversed.
OFF
Ceiling Use when installing the projector to a ceiling. When set
to "ON", the projected images are horizontally and
vertically reversed.
OFF
Reset Resets all adjustment values for the "Advanced" menu
functions except for the "Language" setting to their
default settings.
• Press the [Enter] button to display the confirmation
screen, and select "Yes".
• Select "Reset All" to return all menu settings including
settings for the "Video" and "Audio" menus to their
default settings. (p.55)
-
Using the Configuration Menu Functions
To Next Page
Loading...
