17
Connecting to an Audio Source
Connection of an audio cable from a video audio source;
1. Switch off the projector and video source if they are on.
2. Connect one end of the video/audio cable to the Audio In jacks
on the projector. Insert the white plug into the L Audio In jack
and the red plug into the R Audio In jack.
3. Connect the other end of the video/audio cable to the audio
output jacks on the video audio source. Connect the white plug
to the left channel and the red plug to the right channel.
Computer In 1 Computer In 2
Monitor
Audio In 1 Audio In 2 Audio Out
S-Video
Video In
Audio In
L
R
Remote
1-Mouse/ Com-2
white
red
white
red
A/V cable
To Next Page
Loading...
